It varies from one vehicle to the next.
The spinning shaft from the engine to which the propeller is attached.
why propeller shaft are made hollow
Slip JointThe propeller shaft has to meet both of the changes i.e., the angular change coming between the gear box and differential and the change in length of the distance between the gear box and differential. The propeller shaft is also not on the same line as the gear box output shaft but it runs to the rear axle at an angle because the level of the rear axle is lower than the gear box.¾ To adjust 'angular motion', universal joints are provided.¾ To adjust for the change in length of the propeller shaft, a slip joint is provided.
Weight savings.
I dont believe a 2003 Sentra has a propeller shaft because it is a front wheel drive vehicle. Only rear wheel drive vehicles truly have a propeller or DRIVE shaft. It runs down the center of the vehicle, length ways, connecting the output end of the transmission to the input end of the differential.
driving shaft, propeller shaft, Cardan shaft
automobile propeller shaft material
Loser loner major wannabee
important reason behind inclining the shaft is to avoid/reduce various vibrations that may come up from the propeller and shaft rotation. various rulebooks have the minimum clearances for hull/propeller, so when the hull and propeller are designed and the minimum clearances are not satisfied shaft are inclined. other reasons include better positioning of engine bearers, better flow angle to the propeller blades
important reason behind inclining the shaft is to avoid/reduce various vibrations that may come up from the propeller and shaft rotation. various rulebooks have the minimum clearances for hull/propeller, so when the hull and propeller are designed and the minimum clearances are not satisfied shaft are inclined. other reasons include better positioning of engine bearers, better flow angle to the propeller blades
I think they are referring to driveshafts -1) there are 2 different kinds one transaxle have an unequal length from the transaxle2) There is also one model or more that are delivered with an equal length of driveshafts and connected with an intermediant drive shaft(or propeller shaft) to equal out the length from the transaxle.all the best pvdanoscar