The wiring for the early 700R4 controlled the lock up converter only.
We used to ground the wire by passing the external vacuum control so as soon as the transmission went into over drive it would lock and stay locked to prevent transmission overheating.
No, the 700R4 speed sensor will not work in a TH350 transmission, as they use different speed sensor designs and mounting configurations. The TH350 typically relies on a mechanical speedometer drive, while the 700R4 uses an electronic speed sensor. To retrofit a 700R4 speed sensor into a TH350, significant modifications would be required, including changes to the transmission and potential adjustments to the vehicle's wiring and speedometer system.
YES. If it is a 700R4 and is a 4x4 transmission. That truck came factory with a 700R4
No it will not because the96 Tahoe has a 4L60E electronic transmission in it. The 85 transmission is not a electronic transmission. WILL not WORK.
Yes, a 1990 model 700R4 transmission can work in a 1995 Z71, but there are some considerations to keep in mind. You may need to address differences in electronic controls and wiring, as the later model may have more electronic components. Additionally, ensure that the transmission’s output shaft and torque converter are compatible with the Z71's drivetrain. It’s advisable to consult with a professional for a seamless installation.
Yes it will fit and it will work
NO, That year truck MUST have the 4L60E transmission put in it.
NO it will not WORK... That truck must have the 4L80E transmission put in it DUE to the COMPUTOR That's in the 93 truck.
Yes, a 168-tooth flex plate can work with a 700R4 transmission, provided that the engine it is mated to is compatible with that flex plate. The 700R4 typically requires a specific flex plate to match the engine's starter and flywheel specifications. Always ensure that the flex plate is designed for the engine and transmission combination you are using to ensure proper fit and function.
You burban should have a 4l60e in it. All this is is a 700r4 with electronics added. If the bell housing is the same it will fit but it won't work due to the electronics.
NO IT WILL NOT WORK. The 99 MUST HAVE A 4L60E TRANSMISSION put back in it.
First of all is that the 94 suburban has a 4L60E transmission in it. Therefore it will no work in the 87 model.
Any 4L60E transmission, 1993 and up. The mechanical 4L60 and 700R4 from 1992 and earlier will not work.