answersLogoWhite

0


Best Answer

In order to jump start a vehicle one will require jumper cables. The cables are then attached with the red cable being clamped onto the positive terminal of the car with the dead battery and the car that is providing the boost. The black clamp is placed on the negative terminal of the car that is boosting and the other end is connected to any unpainted metal surface in the engine compartment of the dead car. The car providing the boost is then started and once the boosting car is started one can start the vehicle needing the boost. Leave the vehicle running and disconnect the cables.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does one jump start a vehicle?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is better clubpenguin or jumpstart?

To me I think Jump start is better because unlike club penguin, you get to jump in jump start as high as you can, there is a fun game math blaster in jump start, and when you membership, you get to make a mutt in math blaster and when you buy a vehicle, you get to choose your vehicle, but the vehicle I like most is the dragon because you get to fly as high as you can!!


How do you jump start a Pontiac Montana?

Jump starting a Pontiac include jumper cables and another vehicle with a battery. A person will need to put jumper cables on each car battery to jump start it.


What types of battery cables should one use when trying to jump start a dead battery?

Jumper Cables. If your battery has died, you may be able to use jumper cables to jump start it from some good Samaritan_Ü_s vehicle. If you can safely use jumper cables on your vehicle, make sure that the battery on the good Samaritan_Ü_s vehicle has at least as much voltage as your own.


Can i use 2001 lesabre to jump start another vehicle?

Yes, it will work just like any other vehicle.


Can you jump start a 6 volt truck from a 12 volt?

Yes, you could but you would damage any electronics on the truck that were on when you jump start the vehicle. I would advise against it.


How to jump start 2008 Chevrolet Cobalt?

In order to jump start a 2008 Chevrolet Cobalt, you are going to need a pair of jumper cables. You need to connect your car with a running vehicle.


How do you jump start BMW 7 series?

A BMC 7 series is jump started by connecting the positive lead to the donor vehicle and the BMW. The negative leads are then connected to bare metal and the vehicle started.


Which is better jump start or miniclip?

mini clip is probably better than jump-start because mini clip has a lot of games and jump-start is one game but I've never been on jump-start


How long does a jump start need to charge after a jump?

After jump-starting a vehicle, it is recommended to drive it for at least 15-30 minutes to allow the battery to recharge. This will help ensure that the battery has enough power to start the car on its own the next time.


How to start a 2000 Toyota Solara after the battery has gone down?

Jump start it from another vehicle or charge the battery. If the battery is bad, replace it. If you jump start it and the battery is dead you will have to wait about 15 minutes with the jump car running and connected to the dead battery, in order to build the battery up enough for it to actually take a jump.


The battery was dead when I put jumper cables on it tried to start the keys were not in the ignetion?

Find the keys, then jump it off and try to start the vehicle.


How do you bypass a starter to start a car?

You typically can't bypass the starter - that is, after all, what actually turns the engine over to start the vehicle. If you have a manual shift vehicle, it is possible to roll start the vehicle. The key needs to be in the on position. You would roll the vehicle while it's in neutral, jump in, and shift it into gear.