The light is on because there is a problem with the SRS. Have it repaired by a pro, and he will turn off the light.
To reset your airbag light, in a Nissan Altima, you should turn the car on. From there, as soon as the airbag light stops flashing, turn the car off instantly. Repeat this three times to reset the airbag light.
If the airbag light is on, there is a defect somewhere in that circuit. You turn the light off by isolating and fixing the defect. Start with the fuse box.
Remove the wiring harness from the back of your 1991 Chevy Corsica turn signal. Remove the turn signal retaining bolts. The entire turn signal will come out. Reverse the process to install the new turn signal.
To turn off the airbag light you need to give a firm, well placed punch to the person nearest to you.
Check the airbag ring wiring behind the airbag. does it turn on when you turn the wheel?
The airbag light stays on when the computer detects a malfunction. The problem will need to be repaired before the light will turn off.
When the airbag light comes in in a car, it means that there is a problem with the airbag. In order to get the light turned off, one must take it to a technician.
Turn on car but do not start wait until airbag light gos out, turn off car before it starts to flash. do this 4 times
Take the 1992 Toyota Camry to receive a diagnostic test. The machine will allow the test to manually turn of the airbag light and also see what is causing the light to turn on.
i installed a radio w/ harness and the airbag light is on, how do i turn it off or reset it?
Turn on car but do not start wait until airbag light gos out, turn off car before it starts to flash. do this 4 times
For the airbag light to turn off, you'll need to repair the cause of the airbag malfunction, or disable the airbag by using a BMW scan tool or other software.