Audible chime module is located behind the glove box - right lower corner viewing from passenger seat looking forward. The module sounds for many items, lights, door ajar, etc - pin #4 red / pink is the wire coming from drivers door input...
its the alarm telling you your lights are on this happens when you open your door so your door may not be closeing right
that chime is telling you that the door is open if you have owner manuel, you can find in manuel how to turn off the door open chime from working
the seatbelt chime and door chime is hooked up to the stock radio in all gm vehicles just find somebody that knows car steros
The chime is part of the body computer and can not be removed.The chime is part of the body computer and can not be removed.
Your door could be chiming because your door is coming open each time you turn. You should have your door checked to ensure it is closing completely.
It's going to be connected to a fuse. However, that fuse may not necessarily be solely for that warning chime. If it were me, I'd start by checking the fuses and see if I could do it by simply pulling the fuse and not having any other systems go out.
Do you mean the key in ignition chime?
i would consult your maunal and look for your "lights" fuse and that should turn them off once its pulled. im not quite sure what it would be labeled but it sould say "lights" or "Alt Lights"
Open door Turn ignition on press valet button on and off 3 times (you will hear chime) press lock button turn ignition off DONE!!
The door close/open sensor cable malfunction it's nothing to worry about as long as you keep the doors locked
To replace a doorbell chime, first turn off the power to the doorbell at the circuit breaker. Remove the cover of the existing chime and disconnect the wires. Install the new chime by connecting the wires to the corresponding terminals. Secure the new chime in place and test it to ensure it is working properly. Finally, turn the power back on at the circuit breaker.
To replace a doorbell chime, first turn off the power to the doorbell at the circuit breaker. Remove the cover of the old chime and disconnect the wires. Install the new chime by connecting the wires to the corresponding terminals. Mount the new chime to the wall or junction box. Turn the power back on and test the doorbell to ensure it is working properly.