you can take it to advance auto parts and get them to put a scanner on it and clear it... if it is a '96 of later model
"Check Engine" light comes on when you turn ignition switch on and should go off when engine cranks.
Try resetting the fuel cut off switch and see if the engine will start
unplug your car battery
Once the problem has been resolved switch off the ignition, leave it a few seconds, then switch on again and the engine fault light should be off. If it remains on then there is a possibility you may have more than one fault.
door ajar switch in door
The stop engine light might not come on on your N14 Cummins when the switch is off.
(this should be a grammar question) Switch off the light(s).
The most likely answer is that the parking light switch on top of the steering column is turned on. --Ken The parking light switch is turned off,the engine is turned off,they are still flashing
how to turn off engine light on 2002 Chrysler int
on the driver side by the front speaker up underneath is a switch that turns off the check engine light.
well most people say turn off the light but you could say switch of the light.
there isn't a switch that will turn off the engine light, but there is a connector that you plug in a scan tool to find out why the light is on, and with the tool you can reset the computer which will turn the light off, or you can try this, disconnect the neg. side battery cable for about 5 mins. and then reconnect tne cable which should turn the light off, but the code that is in the computer will still be there and the light may or may not come back on.