You can,t switch between high and low beam in DRL mode. Only when you turn on the headlights with the HL switch.
I'm guessing that you want to be able to turn off the daytime running lights on your car. As far as I know, there is no such switch on the Sunfire. The daytime running lights are on whenever the car is running and is in gear.
yes thay do have DTR on a 1995 sunfire
Seperate circuits I believe.
u have a blown headlight. change both bulobs and it will stop.
how so you turn on the daytime running lights on a 99 suburban
On my 98 sunfire, the tail lights and marker lights only work if you turn on the headlights. If only the daytime lights are on, the Pontiac on the trunk is illuminated but no other lights at the rear until brakes or turn signals are activated. This is common with a lot of vehicles out there. Daytime running lights are not necessarily the same candle power as the headlights. I can tell a big difference in mine.
There are a few reasons why your daytime running lights are flashing. Your wiring could be messed up or your lights might be burning out.
The 1992 Ford Ranger did not come equipped with daytime running lights.
from what I've found the only way to shut off your daytime running lights is to put on the e-brake, or take out the fuse, which isn't the best idea. the daytime running lights will also usually not work if there is a blown hi-beam light
Daytime Running Lights
DRL are your Daytime Running Lights
No it did not.