show me how set the timing on a Cleveland motor
Injector timing on b6000 is adjusted by adding or subtracting shims under the injector pump. Timing should be set with fly wheel timing mark on cyclinder #1
what are the timing marks on a chev 305 motor for the year 1995.
Separate issue, if you need too set the timing following a timing belt change or belt slippage then you have to set the mechnical timing of the motor. Go buy a Chilton or Haynes manual which will tell you where the marks are and you can properly set the timing before starting the motor.
You don't set timing on a carburator or are you asking the timing on the motor
16deg. BTDC
There is no timing ajustment, Its controled by ECM- Computer.
Neither. The timing should be set to factory specifications.
In mechanics books it says to set the timing to 6 DBTDC with a timing light, (Caution: this is with all the pollution stuff on the motor) If you removed the pollution gadgets the timing should be set with a vacuum gauge and the timing will be 12 DBTDC.
timing is preset at factory,no adjustments, the sensors send info to pcm to control timing and fuel.
Replace the keyway under the flywheel, change the camshaft timing.
The ignition timing is probably controlled by the computer, and cannot be manually set. Check to see if it has a distributor, if it does it may be adjustable, if not, it is not adjustable.