0
In a jam without a timing light or a vacuum gauge for reference, I would advance the timing a little at a time and test drive the vehicle between adjustments until I heard the engine ping under load, then retard the timing just to the point the pinging stops.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What should the timing be set at on a Chevy 350 with an edelbrock performer cam and manifold?
10-12 degrees
How do you setthe timing on 350 Chevy?
how do you set the timing for a 1997 Chevy 350 5.7 engine
Small Block Chevy 350 timing?
how do i set the timing for a chevy 350 small block?
How do you set timing on a 98 Chevy 350 vortex?
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
How do you set cam timing on a Yamaha big bear 350 4x4?
You set cam timing on a Yamaha big bear 350 4x4, by opening up the bike chassis and looking for the cam timing levers. You can adjust it up or down until you have it set to how you want it.
How do i set the timing on a Chevy 350?
There is a big difference in how timing is set. We need to know what year.
How do you set timing chain and gears in Chevy 350 from scrach?
with no.1 cylinder at top dead center, line up the mark on the cam gear with the mark on the crank,and install the timing chain.
How do you set the timing on a 1997 Chevy 5.7L engine?
you cant set "timing" you have to have a scanner to set cam sensor to 0 +or-2
What should the timing be set at for a Chevy 350 with a 284 degree duration camshaft?
You need to contact the cam manufacturer. Usually 32-40 BTDC @ 3000 rpm.
How do you sEt the timing for early model CHEVY 350?
turn the distributor
How do you set the base timing on a 1997 350 with a timing light?
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
How do you set the timing on a 1994 Chevy 350 5.7L?
The timing is electronic controlled. You MUST have an OBDII engine scanner to set the timing to specs. Timing light will not work.
