1.With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3.Push in AND HOLD the button/knob that switches the odometer
4.Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5.Release the odometer button/knob.
6.Turn key to OFF position.
7.That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so
how do you reset the check engine light on a 2005 Toyota tundra
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
The check engine light has nothing to due with an oil change.
Resetting the oil light on a Toyota Corolla Verso is very easy to do. You just need to take the battery cables off the battery for a few minutes and then put them back on. This will reset the oil change light.
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
To reset the reminder light on a Toyota, you need to turn the ignition key forward without starting the vehicle. You then need to pump the gas peddle 3 times within 10 seconds and it will reset the reminder light.
To reset the T belt light in Toyota kindly see your manual or take it to a Toyota accredited car dealer.
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
how to reset oil timing on 1990 toyota
You must have the special needed tool to reset the oil indicator light.
How do you reset maint read light on 2010 corolla