how to replace throttle cable on grizzly 600
To remove the throttle cable from the carb housing on a Grizzly 600 ATV, first, locate the throttle cable where it connects to the carburetor. Loosen the lock nut on the throttle cable adjuster and unscrew it to relieve tension. Then, carefully detach the cable from the carb linkage by either pulling it out or removing the retaining clip, if present. Make sure to keep track of any small parts during the process for reassembly.
On a 1998 Yamaha Grizzly 600, the sensor you may be referring to is likely the throttle position sensor (TPS), which is located on the throttle body. Additionally, there are other sensors like the oil temperature sensor and the speed sensor, which can be found in their respective locations near the engine and transmission. For precise troubleshooting, it's best to consult the service manual specific to that model.
yes
What are the valve clearances on a 2001 Yamaha grizzly 600?
about 60
a diagram
.008-.013
32HP
one
The 2001 grizzly 600 ATV is "Air Cooled". There is no coolant. The little radiator in the front is an oil cooler.
looking for valve adjustment for a 1998 600 Grizzly by Yamaha
I am not sure what to do if your Grizzly 600 Yamaha will not start. You can try taking it to a shop and having it worked on.