0
What else can I help you with?
What are the specs of the rc hummer h2?
The RC Hummer H2 is a gas powered radio control toy car with a scale of 1:5. It has a 23cc engine, 22kg metal gear steering and Futaba 3000 throttle steering gear. You can purchase the 580 piece kit for about $350 here: http://www.tradeoy.com/products_334065.html
How do you replace steering gear box 1993 on ford f150?
To replace the steering gear box on a 1993 Ford F-150, first, safely lift the vehicle and remove the front wheels for better access. Disconnect the battery, then remove the pitman arm from the steering gear box using a puller if necessary. Unbolt the steering gear from the frame and detach the steering column shaft. Install the new steering gear by reversing the steps, ensuring all bolts are tightened to the manufacturer's specifications and that the steering system is properly realigned.
Where do you check the power steering fluid in a 2004 Malibu?
It doesn't have any electronic with a steering gear / no fluid
Re 2002 Lexus LS 430 72 000 original miles sluggish feel while steering mechanic says I have a worn steering gear?
That is correct. You most likely have a worn steering gear. The only way to fix it is to replace the steering gear.
How do you replace the steering column gear shift arm in a 1995 Toyota Avalon?
To replace the steering column gear shift arm in a 1995 Toyota Avalon, first disconnect the battery and remove the steering wheel and airbag if equipped. Then, detach the steering column cover to access the gear shift mechanism. Remove the retaining bolts and disconnect any wiring or clips attached to the gear shift arm, then replace it with the new arm and reassemble the steering column components in reverse order. Finally, reconnect the battery and test the gear shift operation.
How do you replace a steering gear box seal on a 1994 ford ranger?
To replace the steering gear box seal on a 1994 Ford Ranger, first, safely lift the vehicle and remove the front wheels for easier access. Drain the power steering fluid and disconnect the steering linkage and power steering lines from the gear box. Remove the gear box from its mounting, replace the worn seal with a new one, and reassemble everything by reversing the disassembly steps. Finally, refill the power steering fluid and check for leaks before taking the vehicle for a test drive.
How do you replace the power steering gear box seals in a 1990 4.0L Ford Ranger?
how to remove a power steering gear box for a 1990 ford ranger 2.9
How do you replace the power steering gear box on a 1992 F150?
Locate the power steering gear box and drain the fluid. Locate the bolts and remove them. Pull the arm. Detach the steering wheel from the steering linkage. PullÊthe linkage until it dischargesÊfrom the gear box. Loosen the bolt on the gear box and remove the box.
If you have replace steering gear box in your 99 Suburban and still have steering wheel play Could it be caused by a loose joint in the steering column?
yes
How do you replace bulb in shift console for 2004 tracker?
how to replace the light bulb on the gear shift on 2004 tracker
How do you replace the power steering gear box on a 1995 dodge ram?
Take it to a garage.
How do you replace power steering gear box on a Kubota tractor?
To replace the power steering gear box on a Kubota tractor, first, ensure the tractor is securely parked and the engine is off. Disconnect the battery, then remove any covers and the steering wheel to access the gear box. Disconnect the hydraulic lines, linkage, and mounting bolts securing the gear box, then carefully remove it. Install the new gear box by following the reverse steps, ensuring all connections are tight and secure before reassembling the steering wheel and covers.
