You go to the mechanic and have it done for you
A ARM AND A LEG
replace rear axle bearing
yes but only if a domestocated rapes it
The speed sencor is on top of the rear diff there is a small unit that is plug in un plug and unbolt or unsrew replace
How do you replace a 1985 Hyundai Elantra Front Axel
its the pinion gear usually happens when the Axel assembly . is low on fluid, or from hi mileage usage, ether replace the Axel assembly .the Axel bearings get hot and start whining. thanks
Support the car on axel stands under rear jacking points then undo shock absorber and then the axel should fall down lower using a jack to support it making the spring loose and should be able to remove and replace.
Local Ford dealer wanted $285 to replace both rear axel seals on a 2005 Ford Mustang GT (Jan 2012).
3:73 with a limited slip
a rear axel is the most common part of any wheeled device that has a front axel. these two axels are sperated into two groups; the front (front axel) and the rear (rear axel) being the most common of the two. now that we've broken these groups down understanding the fundimentles of the complexity that is konw as the rear axel will be as easy as pie. most people mistake the axle as just a long shaft with two wheels, but in fact there is a lot more to it than that. The rear axel of a rear wheel drive automobile has a distinguishing chunck in the center. this is called the differential. this opposing mass of iron houses gears that convert tourq into volocity, this in turn, has the power tomake one go faster. and this has concluded all that anyone would need to to know about a rear axel. if you are still aving trouble finding the rear axel something you should look for is the back end of the automobile. in this area you'll see a set of wheels. these wheels are located on both sides of the automobile. if you shove your head under the automobile in this aera you'll see the rear axel. remember to always check your blinker fluid. what is dlinker fuid
I believe it is Front Axel (FA) and Rear Axel (RA) load capacity in lbs.