0
Had noisy lifters in a 99 Acura. Shop I took it to did an oil change w/filter using ATF-3 (said ATF is oil with detergents). Ran for about 15 minutes, and then did an oil change using oil, ran for 30 minutes, did 2nd oil change, and told me to drive for 100 miles or 1 week, brought it back and they did a 3rd oil change. I thought they were crazy, but I'll be dammed if it didn't solve my problem.
What else can I help you with?
How do you fix a noisy lifter in 2000 B3000?
To fix a noisy lifter in a 2000 Mazda B3000, start by checking and changing the engine oil and filter, as low or dirty oil can cause lifter noise. If the noise persists, consider using an oil additive designed to clean and lubricate lifters. If the issue continues, you may need to inspect the lifters for wear or damage, which could require disassembling the engine to replace them. Always consult a repair manual or a professional mechanic for specific guidance tailored to your vehicle.
When did Lifter Puller end?
Lifter Puller ended in 2000.
How do you install new lifter ford fous 2000?
how install new lifter ford fouse 2000
If your 2000 Dodge Grand Caravan 3.3L engine has a bent lifter rod what are your options?
Replace push-rod
Ticking noise coming from engine on 2000 Chevy impala?
Collapsed hydraulic lifter? - try a quart of mystery oil
What would cause a ticking sound on a 2000 Pontiac grand am It does not seem to be coming from the engine but from the bottom right side?
collapsed lifter?
What do you do when your engine is locked up on your 2000 Chrysler?
Repair or replace.
What is making a squeaking chirping scraping noise at front of engine on a 2000 ford windstar 3.8L engine without the serpentine belt?
it´s possible that a bad hydraulic lifter is working dry.
Where can I find an engine diagram for a 2000 Ford Windstar?
www.autozone.com click on repair info :)
The engine is making a ticking noise when the rpm goes above 2000 the noise starts to fade away after a while and is louder when the engine is cold any ideas?
This sounds like a hydraulic valve lifter that is dirty, sticking and is not getting enough oil to lubricate the lifter. After the engine warms up and the oil pressure is stable, the lifter begins to get enough oil and quiets down. Try changing your oil and use a lighter weight oil like 10/W/30. After 2500 miles return to your former vescosity oil.
Is there an engine diagram for a 2000 Chevy Tracker?
Yes, there is an engine diagram for this specific vehicle. It is found in the maintenance and repair manual books to this car.
How do you put a timing belt on a 2000 Honda Accord?
This is a complicated repair that requires you to also replace the water pump. Do this repair incorrectly and the engine will be severely damaged when you start it. Have this repair performed by a professional.
