You're not supposed to... it's there for a reason!
The 2000 Dodge Neon computer is behind the kick plate on the passenger side of the passenger compartment. Remove the kick plate. Remove the computer retaining bolts. Remove the computer wiring harness.
Yes, one passenger side airbag is mounted in the dash and one driver airbag mounted in the steering wheel.
The airbag light stays on when there is a malfunction in the system. The airbag computer will need scanned to know possible causes.
how to remove a door lock cylinder on 2000 dodge neon
Take the passenger side tire off and remove the splash guards... should be easy from there
On a 2000 Dodge Neon, the airbag diagnostic module is typically located underneath the center of the dashboard, near the steering column. It may be mounted to the vehicle's frame or secured to a bracket. To access it, you may need to remove some trim panels or components around the dashboard area. Always ensure the vehicle's battery is disconnected before working on airbag systems for safety.
You take it out
The airbag light stays on when the computer has detected a malfunction and set a code. Clearing the code with out repairing the failure will not shut the light off.
Yes.
... Turn the key and pull towards the passenger side.
A 2003 Dodge Neon does not come with a passenger side deactivation switch. The only way to turn it off would be to take the airbag fuse out but that will disable all the airbags and you will have a constant flashing light on in your dash.
Under the passenger side headlight assembly, you have to remove the entire assembly to get to it.