The blower motor can be easily removed under the hood on the firewall. This may or may not give you access to the heater core. If not you will have to remove it from under the dash.
To change the heater core in a 1963 Chevy Impala, disconnect the negative battery cable and loosen the radiator cap. Remove glove box door and remove wiring connected to the heater core. Then remove the heater core from under the dash and replace with new.
Remove the passenger side fender and wheel well. Remove the blower motor wire. Remove the heater hoses. remove the nuts holding the heater box to the firewall. Remove the heater box from the firewall take out the heater core revese this process to replace all removed parts.
You can access the heater core from the passenger side kick plate in your 1964 Chevrolet Corvette. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
i have a 62 cadillac,how do you remove the heater core
Remove the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To remove the heater core on a 1992 Grand Marquis, first remove the dash board. Then remove the AC box to have access to the heater core.
Drain the water from your 1988 Chevy cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
Remove the center console remove the floor vent remove the heater core cover the heater core is right under the climate control unit remove the two screws that hold the heater core in place, open the hood and remove the heater hose from the heater core lines, now go inside and pull out the old heater core you don't have to remove the whole dash just the front of it
Begin by removing the water supply lines from your Nissan heater core. Remove the heater core retaining bolts. The heater core will come out.
You will need to remove the water lines from your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Remove the kick plate on the passenger side of the passenger cabin. Remove the heater core water supply hoses. Remove the heater core retaining bolts.
Begin by removing the water supply hoses to your heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install the new heater core.