0
To change the starter, first you must remove the Power Steering pump and remove the oil pressure sending unit wiring. The bottom radiator hose is in the way of the top power steering bolt so if the hose is stiff, you must remove the hose. If flexible, you can pushover to the side and losen hte bolt.
NOTE: The starter weighs approximately 45 lbs so be very careful when removing so you do not smash your finger between the starter and the oil pressure sending unit.
What else can I help you with?
What is the weight in pounds of a Massey Ferguson 285?
The weight of a Massey Ferguson 285 tractor is approximately 5,500-6,000 pounds.
How do you remove hydraulic pump from a 285 Massey Ferguson tractor?
To remove the hydraulic pump from a Massey Ferguson 285 tractor, first ensure the tractor is turned off and properly secured. Drain the hydraulic fluid to avoid spills and disconnect the hydraulic lines from the pump. Then, remove any mounting bolts securing the pump to the tractor and gently pull the pump away from its housing. Be sure to consult the service manual for specific details and torque specifications related to your model.
What year is a Massey Ferguson 285 with a serial 9A269236?
Since the 1977 model serial numbers start at: 9A254045, and the 1978 model numbers start at: 9A276935, my best guess would be that your MF-285 is a 1977 model. Source page: http://www.tractordata.com/farm-tractors/000/7/7/775-massey-ferguson-285.html
What is a good hydraulic fluid for a 285 Massey Ferguson?
A good hydraulic fluid for a 285 Massey Ferguson is typically an oil meeting the specifications of ISO 46 or a universal tractor transmission fluid (UTTF) that complies with Massey Ferguson's requirements. Look for fluids that offer good anti-wear properties and thermal stability to ensure optimal performance. It's also important to check the owner's manual for any specific recommendations regarding hydraulic fluid types and viscosity.
Where do you put hydraulic fluid in a Massey Ferguson 285?
to the left of the gear lever is a cap with a 1 1/16 bolt head on it. remove that cap and fill there. To check the level the is a small dipstick under the lift on the frame.
What size engine is in a Massey Ferguson 285 tractor?
A Perkins 4 cylinder diesel engine comes standard with a Massey Ferguson 285 tractor. Other engine specifications include: 2000 RPMs, 17:5:1 Compression, 4.5 in x 5 in Bore/Stroke and 5.2 L displacement. The engine has a Measurement of 12.5"W x 16"H. You can read about this at http://www.alibaba.com/product-free/104938109/Massey_Ferguson_MF_285_tractor_gear.html
What type of hydraulic oil is used in Massey Ferguson 285?
The Massey Ferguson 285 typically uses a multi-grade hydraulic oil, specifically a UTF (Universal Tractor Fluid) that meets the specifications of MF-1139. It's important to choose a hydraulic oil that provides good lubrication and protection for both the hydraulic system and the transmission. Always refer to the owner's manual for specific recommendations regarding oil viscosity and specifications.
Where can I get an owner's manual for my Masey Ferguson 285 tractor?
You can purchase a manual for your tractor online. The online store is located here: http://www.ssbtractor.com/tractor_manual_display.cgi?m=Massey%20Ferguson&o=MF%20285.
Is a Massey Ferguson 285 tractor considered an expensive tractor?
This model is an older model and to buy one doesn't require too much money and would not be considered an expensive tractor. The general price for this model now would be between $5,000-$10,000 which really isn't too much.
Where online can I find parts for 285 masey ferguson tractor?
There are many online used tractor part websites, vintage tractors are becoming more popular. I suggest http://www.tractorpartsinc.com because they have a substantial selection of Masey Ferguson parts.
What is 5 percent of 285?
5% of 285= 5% * 285= 0.05 * 285= 14.25
What is 285 71?
285
