You have to drop the oil pan from the engine, then it depends on the vehicle and engine. Some oil pumps are bolted right to the bottom of the block and are easy to get out after the pan is dropped, some are part of the front cover of an engine (type found mostly on FWD vehicles) and pretty much require disassembly of the front of the engine.
Remove the oil pan, remove the pump, and replace it.Remove the oil pan, remove the pump, and replace it.
Remove the oil pan. The oil pump will be visible. Remove the oil pump pickup to. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
Remove the oil pan. The oil pump will be visible. Remove the retaining bolts from the oil pump. Reverse the process to install the new oil pump.
Depending on the engine: (According to Haynes Repair Manual) 3.0L - the oil pump is located in the oil pan. You'll have to remove the oil pan, then the oil pump mounting bolt. Lower and remove the oil pump assembly (the oil pump intermediate shaft will come down with the pump). 3.8L - The oil pump is mounted in the oil pump cover/oil filter adapter. The oil pump intermediate shaft is mounted to the timing chain by a clip (I have a 3.0L, so I haven't seen this). You'll have to remove the oil filter, then the oil cooler assembly. Remove the oil pump/oil filter adapter from the front cover (inspect the oil pump gear pocket). Remove the oil pan, the pickup tube bracket nut, and two mounting bolts to remove the oil pump pickup, then lower and remove the pickup. This is probably more info than you wanted, but there you go.
Drain the oil from the oil pan and remove it. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
Drain the oil from the oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
how to remove oil pump for 99 vw passat.
Drain the oil from the oil pan. Remove the oil pan by removing the oil pan bolts. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
You have to remove the oil pan to get at the oil pump.
The oil pump is located near the bottom of the engine. Remove the oil pan from the engine. Remove the retaining bolts to the oil pump. Reverse the process to install the new oil pump.
Have to remove the oil pan to get to the pump.
The oil pump is located on the bottom of the engine. Drain the oil from the oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.