0
How do you remove melex golf cart brake drum It has a keyway on axle?
Wiki User
∙ 8y ago
The studs are attached to the drum, rather than the drum having holes for same to poke through. A puller of the "spider" type with 3 arms that can be secured to the studs with the wheelnuts, and a central screw that bears on the axle, will do the job. Often, an incompetent will leave burrs on the axle or drum, and pound the drum into place, making it almost impossible to remove. Also, you gotta release the brake lock, but I assume you know that already . YOu may also have to release tension on the brake cables, using the turnbuckle underneath the floorboards. markotime@gmail.com if you have more questions
Gayle Bailey
Add your answer:
Earn +20 pts
How do i Remove rear brake hub on 1973 dodge 1 ton truck?
You have to remove the center of the axle plate and the axle to remove the brake hub.
How do you remove a square key from a lawnmower axle?
If you are removing a rear wheel from a riding mower with a square keyway, there is no need to remove the keyway. The tire and rim will slide off with it in place. The rim is slotted all the way through. After removing the wheel you can simply grab it with pliers if you need to remove it for some reason.
How do you remove the front axles on a 1993 Honda Civic?
Begin by removing the tire and wheel from your 1993 Honda Civic. Remove the brake assembly and the brake rotor. Remove the axle retaining bolts. The axle will come off.
99 Toyota 4runner replace rear axle bearings?
Remove the rear wheel from the axle. Remove the brake pads and hardware. Remove the axle end cap. Remove the bearing. Reverse the process to install the new bearing.
How do you remove the right side rear backing plate of a 1992 Cadillac Sedan DeVille?
remove wheel remove brake drum remove brakes disconnect brake fluid line remove parking brake cable from backing plate remove four bolts attaching backing plate to axle housing remove wheel remove brake drum remove brakes disconnect brake fluid line remove parking brake cable from backing plate remove four bolts attaching backing plate to axle housing
How to replace the wheel bearings for 2004 Chevy Impala LS?
remove front wheel, remove complete brake assembly (2 15 mm bolts) remove brake disk, remove old wheel bearing bolts, 3 13mm bolts from rear side, disconnect antilock brake wire, remove center axle nut, 33mm, tap end of axle to loosen axle from bearing, remove bearing. install new bearing with center axle nut torque 120 lb, 13 mm bolts with 85 lb torque, install brake disk and wheel.
How do you remove front brake drum on kawasaki mule 2500?
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
How do you remove the rear axle from a 1995 Yamaha Timber wolf?
remove the axle nut on the side with the brake hub...and pull threw the other side....very simple
How do you remove rear axle 2003 gmc Yukon?
Remove wheel, Remove drum or disc brake rotor,remove rear differental cover. Remove shaft between the spider gears that is held in by a lock bolt. Shove the axle from the outside toward the differential and remove the "C" clips that hold the axle in inside the diff. and then the axle can be removed.
How do you take the axle out of a Chrysler 8.25?
To remove the axle shaft, first remove the wheel, and brake drum/rotor. Second, remove the differental cover. Third, remove the bolt holding the spider gear shaft, and remove that shaft. Fourth push inward on the axle shaft to remove the horseshoe clip on the inside. The axle shaft will now pull out.
How do you remove front brake rotors on a 2000 f350?
to remove brake rotors you need to jack vehicle off ground remove wheels remove brake caliper,these are secured with 2 bolts on back side of calipers next remove axle nut from spindle, and outer bearing slide rotor off axle. dont drop inner bearing instalation is exact opposite
How do you re move axle from Honda 1987 trx250x 4wheeler?
Block up the ATV with the rear end off the ground. Remove both rear tires. Remove the brake assembly(brake drum, etc). Should be two locking nuts that hold the axle in place. remove those nuts. Axle slides out the passenger side
