To remove the glove box in a 2005 Scion xB, first, open the glove box and locate the two stops on the sides; gently push in on the sides to release them. Next, remove any screws or clips securing the glove box to the dashboard. Finally, carefully pull the glove box out of its hinges, ensuring not to damage any attached wiring or components.
To remove the glove box in a 2006 Scion xB, first open the glove box and locate the two screws at the top that secure it to the dashboard. Remove these screws using a screwdriver. Next, gently pull the glove box towards you to detach it from the hinges at the bottom. Finally, disconnect any electrical connectors if present, and the glove box should be free to remove completely.
Behind the glove box, remove the screw a the right of the glove box and pull gently.
Take it to the dealer.
how to remove my glove box
Remove the glove box and its behind that
tire pressure....reset in glove box
how to remove glove box in 1993 camry
Shinny metal box behind the glove box. Glove box door need only to remove to gain access to PCM.
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.
passenger side under glove box...you don't have to remove glove box to get to it...generation vibe forum has clear photos
above the glove box behind the dash pad remove the glove box and look up in the dash you will see it
To remove the glove box from an S10 pickup, first, open the glove box and remove any contents. Next, locate the screws or bolts securing the glove box hinge and the stops; these are typically found on the sides and bottom of the glove box. Remove these fasteners using a screwdriver or socket wrench, then gently pull the glove box out of its mounting brackets. Be cautious of any wiring or clips attached to the glove box and disconnect them if necessary.