To remove the glove box from a Chevy Sierra, first, open the glove box and locate the screws or bolts securing it to the dashboard. Remove these fasteners using a screwdriver or socket wrench. Next, gently pull the glove box towards you while disconnecting any electrical connectors if present, and finally, lift it out of its hinges to complete the removal. Make sure to keep track of all screws and components for reinstallation.
To remove the glove box on a Chevy Celebrity pull the glove box out, then push up on the tab on the underside of the box to release the latch that keeps the globe box in. It will then simply pull the rest of the way out.
It will be inside the glove box to the right. You will have to remove the glove box.
Take it to the dealer.
Pull the glove box out then reach underneath and push up the plastic tab to release the stop. The glove box will then pull on out
behind the glove box on passenger side...you will have to remove glove box to get to it
To remove the glove box from a 2009 Chevy Impala, first open the glove box and locate the stops on each side; gently push the sides inward to fully open it. Next, remove the screws securing the glove box hinge, which are typically located at the top and bottom of the glove box. After the screws are removed, you can pull the glove box out of its housing. Finally, disconnect any attached wiring or components as needed before fully removing it from the dashboard.
The 1979 Chevy Silverado glove box latch is held in place with two retaining screws. Remove the retaining screws and the glove box latch will come off.
Behind the glove box. Check your owner's manual, it will tell you how to remove the glove box and replace the filter.
The cabin air filter on a 2008 GMC Sierra 1500 is located behind the glove compartment. To access it, you need to open the glove compartment and remove any contents, then gently squeeze the sides of the glove box to release it from its hinges. Once the glove box is lowered, you can remove the cover to reach the cabin air filter.
Passenger side behind the glove box. Remove the glove box to get to it. Change your air conditioning air filters while you are in there.
behind the glove box on the left side remove glove box 6 screws disconnect the light
its is located under the glove box. Remove three screws inside the front edge of the glove box, close it and remove three screws just below the glove box. Has three clips holding in the whole glove box, pull to remove the whole box. filter has two clips holding it in.