To remove the front seat from a Fiat Punto, first, slide the seat all the way back to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. Next, tilt the seat forward to access and remove the front bolts. Finally, disconnect any electrical connectors (if applicable) and carefully lift the seat out of the vehicle.
I'm afraid you cant remove the front head rests, very frustrating as I've brought new seat covers :o(
Remove front passenger seat on Lexus es300?
how do I remove the front seat from a 1991 fatboy
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
5, there are 2 in the front and a 3 seater in the back
To remove the upholstery from the front seats of a Fiat Punto MK2, first, detach the seats from the car by unbolting them from the floor using a socket wrench. Next, carefully remove any plastic covers and clips holding the upholstery in place, often found along the sides and back of the seat. Once the clips are removed, gently pull the upholstery away from the seat frame, taking care not to damage the foam. Finally, if the seat has a headrest, remove it by pressing the release button and sliding it out before fully taking off the fabric.
Use hammer.
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.
1) Remove the back seat (pillion seat) 2) Then remove the screw that holds the front seat ( its in the middle), with a philips screwdriver/ allen key 3) lift out the front seat and locate the battery
First disconnect the connectors under the seat. Remove the 3 bolts (Front Left, Front Right, Rear Right). Remove the nut from the Left Rear. Lift seat up and out.