answersLogoWhite

0

big hammer

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do i check piston oil ring?

You have to disassemble the entire engine, remove the piston and check the rubber ring around that piston.


How do you remove the piston from the rod on a 2003 Kia Rio?

There 2 things how remove piston from the rod and how remove oil ring from the piston? 2003 Kia Rio 1.6L


Must you remove the engine my piston is broken?

Yes!


What is a piston ring expander?

The purpose of a piston ring expander is to make it easier remove and install piston rings. Because of the low torque they use, they help to prevent damage to the piston rings.


Why number 8 cylinder in 5.9 360 lost compression?

Burnt, bent, broken valvepiston or ring damage,Burnt, bent, broken valvepiston or ring damage,


C230 komp 1998air flow sensor keeps oiling up?

maybe ring piston broken


How do you fix nail gun that blows air back out of the top and wont shoot nails?

That means the 'O' ring on the 'hammer piston' is broken. You can often remove the top (CAREFULLY, there is a large spring in there) to get the O ring out, -or take the whole thing to a power tool shop.


How do you test for broken piston ring?

Do a compression test on each cylinder looking for one that is significantly lower than the others.


How do you change piston ring for contact point TMX 155?

To change the piston ring on a Contact Point TMX 155, first remove the cylinder head and cylinder by loosening the bolts and carefully lifting them off. Next, take out the old piston ring by gently expanding it and sliding it off the piston. Install the new piston ring by aligning it with the piston grooves and ensuring the gap is positioned opposite the connecting rod. Finally, reassemble the cylinder and head, ensuring all components are secure before testing the engine.


What causes oil being blown out of exhaust?

Seriously worn piston rings and more than likely a broken oil ring.


Why would your Chevy Cavalier 2.2 lose compression?

bent valve, burnt valve, stuck valve, broken piston ring, cracked piston, cracked head, blown head gasket.


How do you install piston rings?

The DNJ ring spec. information, printed on each compression ring (located next to the piston ring gap), is installed facing the top of the piston for both the top (#1) and middle (#2) compression piston ring slots. The oil control ring can be installed just like any other oil control ring in the bottom (#3) piston ring slot.