There is no special setting for this. A PCM is always in learn mode. If you clear the settings by unhooking the battery for a minute, it will relearn everything over the next 50-100 miles or so.
You have to repair the malfunction that is setting the code that has put the computer in limp mode.
find a parts house or dealer that can flash the new PCM, you will need the Vin.# year make and modle.
you put it in safety mode
you cant flood a fuel injected car unless you have bad/no spark, in which case, you have bigger problems. put your foot all the way to the floor on the accelerator, most post 95 cars have a clear flood mode where the injectors won't fire when full throttle is active on startup, then crank away for a little bit, if the car happens o start, immediately take your foot off of the gas pedal
There is no mode, so you would put "no mode" in your answer. Don't put "0" because 0 is a number, so if there isn't a common number put "no" or "no mode" Hope this helps :) x
There's only one way. Put a known good PCM in and see if it works better.
If there is no mode, write No Mode as your answer. Do NOT put 0 as your answer, because it will be marked wrong.
If there is mode you can put no mode or none for example1.2.11.14.17.4.21.9There is no mode hope it help
the shape of a flood is simple if you put it in a container it will stay but then let it out and it comes out
In order to put your DISH Network remote back into "TV Mode," you will simply need to press the clear colored button in the upper left corner of the remote that is labeled, "TV." The button will temporarily light up red & then turn off, after the light goes out you will then have successfully put the remote into TV mode.
Here is how you put flood in a sentence.... The storm left a flood in my basement. please stop laughing I'm blushing jk peace and blessing peace and blessings bye