You can get a kit in Motor stores to patch mufflers or you can weld a patch but remember it is only a temporary thing to tide you over as eventually you will have to change it
you want to make a hole in a muffler or you want to patch one up. Make a hole you can use a drell patch a hole best use sheet metal and rivets then muffler puddy around that
Would it work with tape
find the leak and patch it weld if you have to or just simply replace it lol
Yes! This can easily be done with a rubber pipe coupling bought at home depot.
If the rest of the exhaust system is in good shape, a honest muffler shop will replace only what is damaged.
you could have a small hole in your exhaust between your engine and your muffler....you can patch the exhaust or replace your exhaust
the muffler rattling? the muffler rattling? the muffler rattling?
A Rock muffler (or silencer in British English) is a device for reducing the amount of noise emitted by a machine.Rock muffler - rigid silencer muffler
The muffler is most likely clogged and will not allow the exhaust gases to exit the combustion chamber. Check the muffler for obstructions or replace the muffler.
Hole in the muffler.
Answer It could be that you need a new muffler. After so long the baffling inside the muffler can burn out. Also make sure that the muffler is not cracked or that exhaust is not leaking before it gets into the muffler. At the gasket between the muffler and the engine. Hope ths helps.
The 1994 Nissan Altima muffler will cost approximately $50. There are several qualities of muffler's available. A stainless steel muffler will cost approximately $200.