How do you paint parking lot lines?

Answer 1

With stencil or tape

There are professional machines for all kinds of road lines and parking lots lines painting, called road marking machine.

According to the structure, construction characteristics and efficiency, road marking machines are generally divided into driving type, self-propelled type and hand-push type.

As for painting parking lots lines, the best suit machine is hand pushed small marking machine.

1.Heat the the coating paints in hot melt machine. Melt temperature was controlled at 180 degrees Celsius to 220 degrees, and stirred for about 10 minutes after the coating.

2.The marker position and the measured position specified according to the design and graphics icons, and then coated in the figure labeled primer paint.

3. the primer is dry hot melt coating can be carried out at the same time spreading paint marking reflective glass beads, increased nighttime identifiable markings, thickness 1.5-1.8mm.

When the marking work starts, the marking bucket should be on the road surface. Because there is a certain gap between marking shoe and the ground, when the marking car was pulled forward, by automatically flowing, a neat marking lines was scraped out, glass beads sow can automatically evenly spreading a layer of reflective glass beads on the coating lines. The gap of marking shoe controlled the thickness of the coating, and was not depended on walking speed of the hand push road marking machine.