0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Are scissors a first class lever?
yea because the fulcrum in that nail in the middle of this scissor and the effort, or input force, is you using the handles and the the load is the end blades of the scissor. First class is when the fulcrum is in the middle, and the load and effort are on the other sidesno
What is a cam phasers?
It's an adjustible timing gear that retards and advances cam timing based on engine load and RPM using oil pressure and a toothed wheel with a bigass spring in it.
What is the best gear ratio for driving up hill with a heavy load?
gear 2
What happens to a spring when a load is applied to it?
You compress it Well, it ALL depends on how hard you push down on the spring.
What is a truck cam phaser?
It's an adjustible timing gear that retards and advances cam timing based on engine load and RPM using oil pressure and a toothed wheel with a bigass spring in it.
A spring that stretches 5.0 cm when a load of 11 N is suspended from it how much will the spring stretch if an identical spring supports the load?
If the two springs are identical, the second spring will also stretch by 5.0 cm when a load of 11 N is suspended from it. This is because the behavior of springs is determined by their stiffness or spring constant, which is the same for identical springs.
What is the difference between a regular washer and a front load washer?
Front-load simply means that the washing machine door is on the front face of the washing machine, rather than a lid that lifts from the of the washing machine (top load). One would 'load' the clothes into the washer through the open front, hence the name front-load.
How is a scissor a lever?
A scissor is a type of lever because it works by applying a force at one end which causes a pivoting motion at the other end. In this case, the handles act as the effort arm, the pivot (fulcrum) is where the blades are connected, and the blades themselves act as the load arm. This lever action allows the scissor to cut through materials.
Where should you park to load your equipment and gear?
Jake marshall
What is spring-stiffness?
Spring stiffness is a property that relates load to deflection. Let k = stiffness and P = load and x = deflection, then P = kx The stiffer the spring, k, the smaller the deflection under a constant load. k can be measured for springs and otherdevices, such as beams, with simple load deflection devices or machines that measure deflection as function of laod
What is the block on the frame of an 1988 dodge Dakota where the brake lines run in to and a lever and a spring system running down to the front of the rear drivers leaf spring?
It is a height sensing proportioning valve. It controls rear brake pressure depending on load.
Why my front load frigidaire affinity is not doing a final spin?
Why my front load frigidaire is not doing a final spin
