How do u jump start a 2007 BMW 525i
yes
The same way you jump start any other car.
use jumper cables Moran
it has a jump start connection at the top left hand side of the engine. if you have the manual it will show exact location...
A BMW 530i is jump started by connecting the cables to the positive leads on both vehicles. The negative leads are connected to strong grounds like the alternator bracket.
There is a jump start terminal under hood with a red plastic cap on it. Ground can go on bolt right next to it.
If it does not have a key lock you need to install a battery or jump from another vehicle to the batter connections.
A BMC 7 series is jump started by connecting the positive lead to the donor vehicle and the BMW. The negative leads are then connected to bare metal and the vehicle started.
Take Another Car and Wire Their Batteries TogetherThen start The Car And Your Battery Will Recharge A Littleenough to go to a BMW dealer or autozone shop.
You would jump it much like a standard car but you would park the working car behind the BMW Z3 because the battery is in the trunk under the trunk mat. BMW does this to create more even weight distribution in the car.
To jump-start a BMW 745i, first ensure both vehicles are turned off. Connect the positive (red) jumper cable to the positive terminal of the dead battery, then attach the other end to the positive terminal of the working battery. Next, connect the negative (black) jumper cable to the negative terminal of the working battery and the other end to an unpainted metal surface on the BMW to ground it. Start the working vehicle, let it run for a few minutes, and then attempt to start the BMW.