answersLogoWhite

0

how push button interface with microcontrollor

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Why using pullup-resistors in 8051 microcontroller?

to determine the state condition of microcontroller's input when microcontroller is reading the input port


What is the PIC Microcontroller?

PIC Microcontroller which means Peripheral Interface Controller. PIC Microcontroller is originally developed by General Instrument's Microelectronics Division.


What is the Different Between Microprocessor and Microcontroller?

The basic difference between the microprocessor and microcontroller is that we can interface a microcontroller directly means "for example we can directly connect a keyboard to microcontroller to any of its ports"....where as for microprocessor we can't interface directly...we require a circuit board since it requires ram,ic's.....etc.,! beyrojac mahinay


Different between micoprocessor and microcoputer?

a micro processor does not have external memory it is basically the CPU alone it does not have any inbuilt input output interface in a microcontroller there is a external memory like ram etc. it also has input out inferface devices like analog to dital converter or vice versa etc


What is the difference between a single board computer and a microcontroller?

The difference between a single board computer and microcontroller is that a single board lacks a general purpose interface and the mass storage devices.


How do you interface nunchuk with microcontroller?

To interface a nunchuk with a microcontroller, you typically connect the nunchuk to the microcontroller's I2C bus, using the SDA and SCL lines. The nunchuk requires power (usually 3.3V) and ground connections. You can then use a library or write custom code to read the data from the nunchuk, which includes joystick position and button states, by sending and receiving I2C messages. Make sure to properly initialize the I2C communication and handle data processing in your microcontroller's firmware.


What is an input interface and how does it differ from output interface?

AN input-output interface is the piece of equipment or location at which information can be input and output from a device such as a computer. Examples of an input interfaces are: Command line, such as a DOS prompt. You manually enter in commands to achieve your results that you want. The keyboard is also part of this interface. A GUI (graphical user interface) is an Icon based interface and is much more user friendly and easier to use. (from a novice stand point) ;-) An output interface could be a printer a screen or a speaker.


Where is the AUX input for a 2005 X5?

the BMW auxiliary input interface was not available until 2008 models, but this is something you can add to the factory audio system, just purchase the interface and plug it into the external CD changer wiring do a search for BMW Audio Input Interface


What is the operation of MAX233 IC?

this is connector chip used for asynchronous serial interface and its task is to make voltage level operative for next connected device.it is usually used in pc and microcontroller interface


Is a PIR input or output?

A PIR (Passive Infrared) sensor is an input device. It detects infrared radiation emitted by objects, typically human bodies, and converts this detection into an electrical signal that can be read by a microcontroller or other processing unit. The output from the microcontroller, based on the PIR sensor's input, can then be used to trigger actions, such as turning on lights or sending alerts.


What do PC based control systems use to interface with field devices?

An input interface card


How can I connect a guitar amp to an audio interface?

To connect a guitar amp to an audio interface, you can use a 1/4 inch instrument cable to connect the amp's output to the interface's input. Make sure to adjust the input levels on the interface to avoid distortion.