You loosen the nut own the governor arm turn the arm clockwise and then turn the governor shaft clock wise. Tighten nut That should do it.
a manul to show me the way to do it
To check the governor on a Briggs and Stratton engine, first, ensure the engine is off and cool. Remove the air filter and locate the governor arm connected to the throttle plate. Manually move the governor arm to see if it returns to its original position, indicating proper function. Additionally, inspect the governor spring for any damage or wear, and verify that the linkage is free of obstructions.
If you don't want the engine to blow up, yes.
0.030 is the gap for briggs and stratton 4.5 hp mower
You can get that info on the Briggs and Stratton website. Just go to: http://www.ereplacementparts.com/briggs-and-stratton-parts-c-16758.html?gclid=CPCZj4vGr58CFZdM5Qodp3bDsA and enter your engine model number.
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
Kohler for sure
The 15.5 Briggs does not have an oil filter.
Briggs & Stratton part # 491056 NAPA filter # 1348
If the first two digits of the engine's model number are the same, the answer is yes.
How do I change points to electronic ignition on a 5 hp briggs & stratton small engine?
what plug size fits a 3.75 briggs and stratton,and a 19.5 briggs engine and what is the gap. thank you