The trunk light and beeping is controlled by a switch in the trunk. The switch is located in the housing for the trunk latch. Repair the switch circuit to fix the problem.
it seem to be the trunk plastic is broke and I have brought the the part and wont to fix it
The simple fix is to remove the bulb from the trunk light. The more complicated fix is to find out why it is staying on. More than likely the switch is bad.
I own a 2007 pontiac grand prix. Had this same issue. No recall has been done by the company; however, after many visits to the shop to resolve this very scarry issue - the switch was replaced (turn signal/light adjustment) This seemed to fix the problem.
Check the release fuse first. Then check the relay, and the switch. If these are all ok, then check the solenoid at the release inside of the trunk.
the driver's door should only be opened and the trunk,then rock the switch and see how that works
Read your manual. There is a switch in the glove box to disable the trunk release button on the dash. you lock the glove box with the regular key. When you give someone the valet key they can not get in the trunk.
Battery in 2003 s430 sedan changed last Sunday now trunk only opens half way tried the toggle of the automatic switch in the door but that did not fix the problemhow can this be fixed?
The switches from the 1987 - 1989 Chevrolet Corsica and Pontiac Tempest should be compatible. I
It is the 20amp fuse in the center of the fuse box under the hood. I had to fix mine in my 2009 Pontiac GXP. Anthony Mayfield
make sure to check the "trunk security" switch inside the trunk. it is located on the drivers side of the trunk and needs to be in the on position (press the side of the switch with the car drawn on it). if the off position is pressed the interior trunk release switch won't work and the remote button on your keychain will only work when the motor is off. this has been an anoyance of mine for months and i finally read the owners manual.... hope this helps.
Bad motor? Bad switch? Try swapping the wires on the switch to see if it will work