take all screws out off the door plastics and then see what has happened but what it could be is a broken sensor
The 2006 Nissan door lock relay switch is located inside of the drivers side door. You will need to remove the door panel in order to access the door lock relay switch.
key does notopen or lock doors on a Nissan maxima 1994
Break the window.
To cut my work in half... Do you mean the door lock or the ignition lock ??
what you should do is bring it to your local Nissan dealer and have them remove it
To remove the door lock from a 1985 Nissan Pulsar, first, disconnect the car battery to ensure safety. Then, remove the interior door panel by unscrewing any visible screws and gently prying it off to access the lock mechanism. Locate the retaining clip or screws securing the lock cylinder and disconnect the linkage attached to the lock. Finally, pull the lock cylinder out from the door.
To remove the door lock on a Nissan Pulsar, first, disconnect the car battery to ensure safety. Next, remove the door panel by unscrewing any screws and gently prying it off to access the inner mechanisms. Locate the lock assembly, disconnect any electrical connectors, and unfasten the lock using the appropriate tools. Finally, carefully pull the lock out of the door.
By inserting the key in the door lock.
Door lock rod retainerany part store will carry these, if out of stock the dealer will definitely have them
To change the hatchback lock on a 2007 Vibe, start by removing the interior trim panel of the hatch door to access the lock mechanism. Disconnect the wiring harness and remove the screws holding the lock in place. Replace the old lock with a new one, reattach the wiring, and secure the trim panel back in place. Ensure everything is functioning properly before closing the hatch.
Its just a retaining clip, nothing fancy, it is connected to the door lock assembly and holds the door lock rod in place.
Did you check the door latch/lock. The latch part might be broken on the inside. If you have the door already open it is easy to chisel out the old door latch inside of the door.