To fix a window motor on a 1992 Grand Am, first remove the door panel by unscrewing any screws and gently prying it off. Disconnect the electrical connector from the window motor and remove the motor by unscrewing it from the regulator. Test the new or repaired motor by connecting it to the power supply before installation. Finally, reassemble the door panel and test the window operation.
how to fix a window motor for a 92 plymoth acclaim
You have a broken cable in the window regulator. You will need a new window regulator assembly.
how will u
http://shbox.com/page/windowmotor.html
replace the window motor.
cannot get motor to line back up. when I do it jams
If electric, take it to a garage or trim shop and have it checked out.
To restore tension in the window spring of a 1992 Firebird passenger side window motor, you need to remove the door panel to access the motor and regulator assembly. Carefully detach the motor from the regulator to access the spring mechanism. Using a suitable tool, such as pliers, you can manually wind the spring to increase tension, ensuring it is securely reattached to the regulator. Reassemble the motor and door panel, ensuring everything is properly aligned and secured before testing the window operation.
you need to remove the window motor then you can just move it by hand,my 92 astro van is the same way
5W-30 according to the manuf.
To install a power window motor in a 1992 Pontiac Sunbird, first, disconnect the negative battery cable to ensure safety. Remove the door panel by unscrewing any fasteners and gently prying it off to access the window motor. Disconnect the wiring harness from the old motor, unbolt it from the regulator, and replace it with the new motor. Finally, reassemble the door panel, reconnect the battery, and test the window operation.
My car had an issue with the antenna motor and my mechanic just fixed it so the antenna stayed up. Cheaper fix than getting a new motor!