0
Add your answer:
Earn +20 pts
How importance it is to get the throttle body fix?
merced throttle body s420
How do you fix a clogged throttle body on a 92 Chevy caprice classic?
take it all apart and unclog it make shure you remember where it all goes or you are SCREWED
How do you fix a sticking throttle on a 2000 Saturn SL2?
Clean the throttle body
How do i fix a Coolant leak under the throttle body?
You will need to remove the throttle body and replace the throttle body gasket. The throttle body gasket can be purchased at most auto-parts stores.
How do you fix a sticking gas pedal on a 2002 Chevy blazer?
Clean the throttle body with a spray throttle body cleaner.
How do you fix a stuck throttle on a 2000 Pontiac grand prix gt?
Butterfly in the throttle body needs cleaning.
How do do fix a car with code P0506?
PO506 is Idle Air Control (IAC) system idle lower than expected. Can be cause by: Vacuum leak Clogged Air filter or clogged Catalytic Converter Faulty PCV valve Dirty throttle body Internal Engine Problem In rare cases a failed PCM
How do you fix a sticking throttle in a Toyota Camry?
Use throttle body carbon cleaner, you can find it in any auto part store.
How would you fix a stuck accelerator pedal on a 1999 Ford Explorer?
Chances are the throttle cable from the pedal to the throttle body needs replacing.
My nitro RC monster truck cuts out stalls everytime i pull the throttle any ideas on how to fix it?
to fix that problem with it cutting out let it warm up a little bit before like 30 40 seconds or so and then barrely pull in on the throttle and then just give it more throttle steadly and after that it should be ok
How can you fix a 5.7L Chevy 1500 pickup fuel throttle body that quit and will only start if starting fluid is sprayed into the throttle body?
tHESE TRUCKS ARE FAMOUS FOR THE FUEL PUMPS QUITTING. hAVE IT CHECKED OUT.
How do you fix a sticky carb on your 93 mark VIIIOne is sticking?
Spray the throttle body (carb) with cleaner, not carb cleaner. You should use throttle body cleaner because there is a coating on the throttle body that will be removed if you use carb cleaner and that coating that comes from the factory should not be removed.
