To drain the hydraulic oil on a Massey Ferguson 698, first ensure the tractor is parked on a level surface and the engine is off. Remove the hydraulic oil fill cap to allow for proper ventilation, then locate the drain plug on the hydraulic reservoir and place a suitable container underneath. Unscrew the drain plug and allow the oil to fully drain out, then replace the plug securely once drained. Finally, dispose of the old oil properly and refill with new hydraulic oil according to the manufacturer's specifications.
from back of tractor right side below cab in front of rear axle a small dip stick is located.
where to put hydralic fluid in tractor \ massey ferguson 1983, 698 engine
Factory built model with Perkins AT4 236 engine rated at 90hp Earlier 698 tractors had a naturally aspirated perkins AD4 318 engine rated at 88hp, there was a dealer fit turbo kit available for this model which raised engine output by approx 20%
The factors of 698 are: 1, 2, 349, 698
209.430% of 698= 30% * 698= 0.30 * 698= 209.4
25% of 698 = 174.5
0.1132
43.625
0.1132
698 mm = 69.8 cm
There are 1000 millimetres in one metre. Therefore, 698 millimetres is equal to 698/1000 = 0.698 metres.
698 is an integer, not a fraction.