If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
For a drop spreader 7, broadcast 5
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
What is the Ortho Spreader 5000 for overseeding
1
For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.
Unfortunately, there is no conversion. The spreaders are calibrated differently.
Setting for scotts rotary spreader of 13-13-13 fertilizer?
There is a conversion matrix on Earthway's site to get the conversion from a Scott's spreader to an Earthway spreader. It is easiest to add 10. For example, Scott's spreader set at 4 should be set at 14 for an Earthway spreader set.
The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.