To change the PTO switch on a JOHN DEERe 318, first disconnect the battery to ensure safety. Remove the plastic cover from the dashboard to access the switch, then disconnect the wiring harness from the back of the PTO switch. Unscrew the old switch and replace it with the new one, securing it in place and reconnecting the wiring harness. Finally, reattach the dashboard cover and reconnect the battery.
john Deere 318 what oil in hydro does it take
The John Deere 318 with the serial number MOO318X31695 was manufactured in 1983. John Deere's serial numbers can help identify the production year, and in this case, the "MOO" prefix indicates it was produced in that year.
.18
1952 t0 1989
The model number M00318X372679 indicates that your John Deere 318 is from the year 1983. The "M00" prefix signifies it is a model made in that specific series, and the serial number helps identify the production year.
Right side of engine on rear
91" long, 5/8 wide
Diagnostics needed for john deere f510 electrical system
probably the governor going bad
The John Deere 318 garden tractor typically weighs around 700 to 750 pounds (approximately 318 to 340 kg) without any attachments or additional equipment. This weight can vary slightly depending on specific configurations and modifications. It's designed for residential and light commercial use, providing a balance of power and maneuverability for gardening and landscaping tasks.
The John Deere model number M00318X476436 indicates a specific piece of equipment produced by John Deere. The "M0" prefix typically signifies a model from the John Deere lawn and garden equipment line, while the "318" refers to the model type, which is a lawn tractor. The alphanumeric suffix "X476436" usually represents the serial number, indicating the manufacturing sequence and year. To get detailed specifications or history, you may need to consult a John Deere dealer or the company's official resources.
Not supposed to, the 318 was designed to have the 46 in or the 50 in deck on it. The 60 in decks mounting hardware that was used on the 420 is not the same. But if you can get it to work, good luck.