0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you install garage opner?
Call a professional
What are the can openers called?
opner
How do you remove the door trim and panel on 1998 Honda CRV?
1. pry open the speaker grill and remove 3 Philips screws (you don't have to remove the loud speaker)2.remove 3 Philips screws that holdes the arm rest3.remowe the plastic Philips screw and remove the plastic clip4.remove the black plastic cover (that covers the mirror screws )by pulling it .5.remove the Philip screw in the door opner,push the door opner unit forward and out.open the little green clip that holds the steel rod and loosen it .remowe the El. window opner plugg.6.open the door panel with a door pray tool ( www.eastwoodco.com )When the door trim is loose ,lift it up (you don`t have to remove the door lock knob.7.remowe the loud speaker plug. The question you ask is tooinvolved for a proper answer. You need to go to a car parts store, and get arepair manual for your car.They cost about $16.00Or, go to a Public Library.
How do you join cricket academy in Pakistan?
Aslamo-alikum dear sir, i play cricket for pakisatn as an opner do u like i play for Pakistan i am very grate ful to u. Umar draz (from faisal abad) my mail address (drazu68@yahoo.com) please reply on my mailing address thanks.i hope u reply me. Allah hafiz.
Does anyone know how to remove the front and rear door panels on a 1996 jeep grand Cherokee?
First leave your front and rear windows open during a hurricane, the water will make the plastic swell and stick to door frame. then have one of your buddies jump in for a ride, when he opens the door the outer panel will open and the inner panel will remain stuck in the frame. Next remove the window and lock wires and you've got you're panel no removal of bolts or pins required! trust me Answer Pop the pins or undo the bolts. There are 4 screws in the door one under the handle one on the top right one near the handle and one near the bottom inside corner. use a small screw driver and remove the circle covers and the little plate behind the opner handle. then remove all srews after all screws are removed pull the panels off. Go to this link http://www.wjjeeps.com/doors/doorpanel.htm it has a very nice explanation, pctures and everything.
