0
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Fran
RafaAdd your answer:
Earn +20 pts
How do you change the serpentine belt on a 1998 Chevy 1500 5.7?
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
Belt changing belt on trailblazer?
You can change the serpentine belt on your Chevrolet trailblazer, by loosening the tensioner pulley. With the loosened tensioner pulley the belt will come off easily. Tighten the new belt with the tensioner pulley.
How do you change ac belt on gmc Yukon?
Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
Where is the belt tensioner on the 2001 alero 4 cylinder?
the belt tensioner is mounted to the block if you are trying to change the tensioner tou have to remove the alternator.if you are trying to change the belt it is the pulley to the left of the alternator it takes a 15mm wrench which you have to pull upwards to release tension
How do you change the belt on a 1998 Chevy Prizm?
Begin by loosening the tensioner pulley. Slide the tensioner pulley to the right and the belt will become loose. Remove the old belt and put the new belt on. Tighten the new belt by sliding the tensioner pulley to the left.
How do change serpentine belt on a 1995 Corsica?
Turn the Tensioner bolt clockwise (to the right)and the tensioner itself will move causing slack in the belt.
Is it necessary to change the tensioner when replacing the serpentine belt on a Ford 3.8 V6?
no, unless the tensioner is bad, other than that just the belt.
How do you change the belt tensioner on a 2000 crown Victoria?
The job is not too hard. With the right tools, just remove the belt, and unbolt the tensioner, and replace. Then with your ratchet i( it fits in the square slot ) slack the tensioner and slip the new belt on. You have to slack the tensioner to take off the belt also.
When should you change your timing belt tensioner?
When you change the timing belt inspect the tenstioner. If it is not in perfect condition replace it.
How do you change the serpentine belt tensioner on 2.4 liter 1998 Malibu?
remove the belt. then in center of the tensioner is a bolt that goes into engine. remove this bolt. then tensioner should come off.
