just ground the parking brake wire
gound it put the wire in the ground of the car sterio
Connect green wire ( handbrake ) to Ground (earth)
i need to hook up the video wire so i can play dvds. i need to bypass the parking brake. how do i hook up the wires to bypass the brake issue
Hello. Bypassing a parking brake on a newer Clarion radio (vx400, nx501, vz401, vx401, and vz709) requires an interface. You can not just ground the parking brake wire or put in a code... people that tell you this are wrong. The least expensive, smallest, and best quality i have found are on http://microbypass.com. I am an installer and i use these all the time. The company also sells them on Ebay too.
Kenwoods are very simple to bypass for the parking brake. Just take the parking brake wire which is usually green and ground it. That's it!
. Bypassing a parking brake on a newer Clarion radio requires an interface. You can not just ground the parking brake wire or put in a code... people that tell you this are wrong. The least expensive, smallest, and best quality i have found are on http://microbypass.com. I am an installer and i use these all the time. The company also sells them on Ebay too.
phase linear uv8020 bypass code for parking brake without remote?
you have to hook it up to a basic toggle switch and ground it and when you turn it on you have to flip the switch a couple times,... you cant just ground it or it will show the blue screen
I have a clarion unit and what i did was run the green brake wire to chassis ground, tap in a toggle switch by cutting the green wire & wiring the green wire to the toggle switch. When the clarion unit is on all you have to do is turn the switch off then on, and that will bypass the brake switch allowing to watch video moving or sitting. Mine works perfect.
Hello. Bypassing a parking brake on a Pioneer radio requires an interface. You can not just ground the parking brake wire. You can buy them on Ebay or Amazon.
The orange wire must be grounded