answersLogoWhite

0

To advance the line on a Toro weed eater, first, stop the trimmer and disconnect the power source for safety. Then, tap the spool head lightly against the ground while the trimmer is running; this will release a small amount of line. If the line doesn't advance, you may need to manually pull more line from the spool by removing the spool cover and pulling the line out, ensuring it's properly threaded through the eyelet before reassembling. Always refer to your specific model's manual for detailed instructions.

User Avatar

AnswerBot

4w ago

What else can I help you with?

Related Questions

What is the spark plug gap for a Toro TC3100 weed eater?

.025


What is the line size for toro edger model 51950H?

The Toro edger model 51950H typically uses a line size of 0.080 inches (2.0 mm). It is essential to check the user manual or the manufacturer's specifications for the most accurate information and recommendations regarding line size and type for optimal performance.


Wherer do I find toro lawnmower's engine number?

i need a model number for the engine of a toro zmaster model # 78491


Who made the toro lx425 lawn tractor?

The Toro LX425 lawn tractor was manufactured by The Toro Company, which is based in Bloomington, Minnesota. Toro is well-known for producing a variety of outdoor maintenance equipment, including lawn mowers, snow blowers, and irrigation systems. The LX425 model is part of their line of lawn tractors designed for residential use.


Where is the fuel filter on an older model toro riding mower?

either in the fuel tank or on the fuel line, may look like a round plastic thing,


How do you replace drive belt on toro 22 rotary mower model no 38435?

A Toro 38435 is a snowthrower manufactured from 1997 to 1999.


What oil gasoline ratio does a Toro weed eater require?

The ratio is 40:1 which come to 3.2oz of oil per gallon of gasoline.


Toro Parts?

form_title= Toro Parts form_header= Use a Toro mower for your lawn. What is the model number for your mower?*= _ [50] Is your mower covered under warranty?*= () Yes () No What parts do you need?*= _ [50]


What is the cost of a toro mower?

Depending on the model of the Toro mower you choose, they average around $280 and go up to $580 for a push mower. Riding lawn mowers by Toro are several thousand.


Where is the model number on a toro 6.5 GTS?

Most the time on newer Toro brand mowers if there is a rear door for a bagger, raise the rear door and the model number will be on a silver color sticker ( with some good glue ) in the upper left corner. When obtaining parts for a Toro you will always need the model number and the first 2 digits of the serial number.


Toro Mower Parts?

form_title= Toro Mower Parts form_header= Lawn maintenance is difficult. Use a Toro mower. What is the model number for your mower?*= _ [50] Is your mower covered under warranty?*= () Yes () No What parts do you need?*= _ [50]


How do you replace a torsion spring on a toro model 20017?

just replaced a torsion spring on handle of Toro model 20023 21" personal pace took handle apart and screws that hold brass cross bar where spring fits into "replaced and it works"