Want this question answered?
system glitch or a short
You can detailed instructions on how to reset your wipers on youtube.com/watch?v=KFBLtlnkpuI
The wiper motor has a switch inside of it. When they are turned off and the wipers go to the down position it trips the switch in the motor that tells the computer they are in the down position. If that switch in the motor is faulty, the wipers are repositioning until the switch is tripped to the off position. THE FIX.... Replace the wiper motor.
my low windshield wipers don,t work? can you help me?
Yes. It is accessed from under the hood, Passenger side right under windshield and if you are going to change it, before opening hood put windshield wipers in vertical position first.
the windsheild wiper motor clutch/windlatch is broken
driver side 22" passenger side 17"
All 1985-1998 Pontiac Grand Ams take 19" replacement windshield wiper blades on both sides front.
how am i supposed to no? I cant even drive yet xD
If wipers stay stright up went turned off, you needs new motor. There are two parts to the motor, one is working and the other is not. Had same problem. new motor fix it
Yes. The wipers are connected to a common arm located beneath the cold air intake cowl along the bottom of the windshield. That arm, in turn, connects to the wiper motor found on the driver's side.
Windshield wiper motors have an internal switch that allows a wiper motor to stay running long enough to keep the wipers moving until they reach the "park" position. Once the wiper gets to the park position, the wiper motor is shut off. The internal switch often fails and either the motor will shut off immediately, wherever it is or it will keep running. It sure seems that you need a new wiper motor.