there is a metal bar attached to a 2 way cable near the rear axle...It should be above and to the side of the middle exhaust box on the long wheel base model. undo the locking nuts on either side of a long nut in the middle of that bar. Turn it clockwise to tighten it. the rear locking nut is a left hand thread.
I have a transit 190 and weighed 1950 kgs over weighbridge last week
(a) adjust co (b) then adjust idling.wish u luck!
channel 190
I have a 1992 (same model as 1990) 2.5d LWB 190 transit, V5 states 3500kgDepends what model there are quite a few!
190 lwb transit on a r reg 50 psi in all 4 works well 4 me
11.5 litres for normally aspirated engines, which is what you 190L R reg transit van is mate.
Startat 1 1/4 turns from seat and adjust for best idle
It is on Channel 190 if you are located in the Los Angeles Area.
Try have it tune up,clean spark plug,adjust timing.it happened to my Benz too.now its starting smoothly
The cheapest way to travel is using public transportation. You can take the train or you can take NJ Transit bus 190 that takes you straight into Port Authority.
To adjust the tilt in a Mercedes 190, locate the tilt adjustment lever or switch, usually found on the driver's side door panel or near the seat controls. If your model is equipped with power seats, simply press the tilt button forward or backward to achieve the desired angle. For manual seats, you may need to pull a lever located under the seat to adjust the angle. Always ensure the seat is adjusted while parked for safety.
203.3= 190 + (7%/100% * 190)= 190 + (7/100 * 190)= 190 + (0.07 * 190)= 190 + (13.3)= 203.3