where do you put freon in on a 2000 gmc jimmy
R134a
Add it to the low presser side. It will be located on the evaporator on the fire wall on the passenger side of vehicle.
The 1996 Suburban uses r134 Freon. The fittings to add Freon are different sizes on r12 and r134, making it impossible to add the wrong type to your vehicle.
It does not take freon. The 1995 GMC Vandura uses the new R134a.
The Freon recharge port can be found on the top of the air conditioner compressor. There will be two ports. The recharge port will be labeled as the low pressure port.
Using a set of gauges you will put the blue hose on the low side which is the suction side and the red hose on the high side which is the discharge side and using the remaining yellow hose you will attach the can of freon and add the correct amount plus add oil as well....
Using the proper type of freon and a gauge, connect to the low side ac port. With the engine running and the ac on high, add freon till the gauge shows full.
R134a
Answer freon install 1991 Chevythe low side is the big tubing high is small you should look for a siver canaster about the size of a thermus it will have a connection for low pressure to insert freon into system
3
Yes, there is a fuel sensor in a 2000 GMC Sierra.