0
What else can I help you with?
How do you replace a water pump on a 1998 Chevrolet Malibu?
take it to a mechanic
How long does changing the water pump on a 1998 dodge avenger take?
The average time it takes to change the water pump on a 1998 Dodge Avenger is six to ten hours.
Where is water pump on a 1993 Isuzu pickup?
It's on the front of the motor, kinda towards the bottom of the block. You have to take the timing belt cover off to replace the water pump.
How do you replace the water pump on a 1998 Pontiac Transport 3.4L?
Remove battery. Remove left engine brace. Remove serpentine belt. Take off water pump pulley. Take off water pump! This was the easiest water pump I ever replaced.
How do you change a water pump on 1998 KIA sportage?
The water pump is driven by timing belt, so, replace the timing belt while you are replacing water pump, because you have to take off timing belt to get to water pump.
How do you change oil pump on 1997 Nissan pickup?
Take it to a gargage and ask for your oil pickup changed
How do you change oil pump 1997 Nissan pickup?
Take it to a gargage and ask for your oil pickup changed
Do you have to take the timing belt off to replace the water pump on a 1998 dodge grand caravan?
yes
How do you change a fuel pump on 1995 Chevy 1500 pickup?
take the gas tank off, the pump is inside the gastank. take the gas tank off, the pump is inside the gastank. take the gas tank off, the pump is inside the gastank.
Do you need to take the fan off to replace a water pump on a 1998 Cadillac Eldorado?
you must first remove muffler bearing
How to Change water pump on a 1998 Chevrolet metro LSi?
To change the water pump on a 1998 Chevrolet Metro LSi, first, disconnect the negative battery cable and drain the coolant from the radiator. Remove the serpentine belt, then take off the timing cover and the drive belt to access the water pump. Unscrew the water pump bolts, remove the old pump, clean the mating surface, and install the new pump with a new gasket. Finally, reassemble everything in reverse order, refill the coolant, and check for leaks.
How do you change the water pump on a 1998 cadillac northstar?
Drain the cooling system.Remove the air filter housing.Remove the water pump belt and the water pump tensioner and any associated brackets.Unbolt and remove the water pump cover.Use a Northstar water pump socket (nothing else will work), rotate the water pump slightly clockwise, then pull it out.Replace the water pump seal. This usually is not included with the new water pump. Reverse the above steps to install the new water pump.Let me know if this helps. It looks like a hard job, but if you take your time it's pretty easy and doesn't take long. Don't rush or look for shortcuts.
