If only high speed is effected check the high speed relay and/or the fan switch/electrical connections for problems.
There should be a smaller plastic box behind the fuse box in the engine compartment. There you will find the high speed fan relay as well as the low speed fan relay.Good Luck
A fan or cooler relay is used in electrical furnace to change the blower speed to the blank speed for cooling
The switch had a meltdown or the high speed relay is stuck.
The cooling fan relay on the 2004 Chrysler Sebring is in the engine compartment fuse box. There are actually two cooling fan relays in this fuse box. One is a high speed radiator fan relay and the other is a low speed radiator fan relay.
Yes there is, but it only operates the high speed function.
A typical blower motor relay only operates the high speed function.
I believe you have a relay that runs the high speed for the heater fan motor. The relay should be located in the power distribution box under the hood.
They are located in the trunk underneath the Rear dash in the trunk compartment. There are 2 one high speed fan relay, and one low.
They are located in the trunk underneath the Rear dash in the trunk compartment. There are 2 one high speed fan relay, and one low.
Under the hood on the drivers side is a distribution box, remove the cover and the low speed and high speed fan relays are inside there.
Could be hi-speed fan relay or secondary winding in blower motor