how do i change my blower motor on my 2007 malibu
They generally locate the heater motor speed resistor nearby the blower motor because the resistor depends on the blower to keep it cooled.
The heater resistor coil is located on the blower motor on the 2006 T300 Kenworth.
It's right behind the glove box. However you must be sure that it is not he fuse or the blower motor resistor that has gone out on you first. You can test the blower motor with 12V power as that is what it gets on high speed. www.trailvoy.com Trailblazer enthusiasts forum.
how do you replace a resister on a front heater blower on a 2006 chrysler town and country touring with a 3.8 motor
Check all of the following........... 1. Power and ground to the blower motor. 2. Blower motor itself. 3. A/C - Heater controller. 4. Lastly scan the vehicles computer to see if the ECM is getting the signal......
where is the location for a blower motor relay on a 2006 ford freestar
To replace a blower motor in a 2006 Chevrolet Colorado first remove the old blower motor. Then install the new motor making sure to connect all the wires.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
The blower motor relay is located underneath the glove box on a 2006 Chevrolet Trailblazer.
Assuming you have no speeds including HI I would check for power at the connection at the blower motor with ignition and switches on. If you have power the motor is shot. If you have no power go back and check the fuses. If the fuses are good check the switch and electrial plug at the switch for damage. If the blower motor speed resistor was burned out you would still have HI speed.
Resistor is located behind the blower motor assembly.