if it has a carburetor it is normal
start the engine and press the gas pedal while it is in park
To reset the light, turn your ignition to on, then press the gas pedal 3 times, then start the car. To reset the light, turn your ignition to on, then press the gas pedal 4 times then you will hear a beep, then start the car.
You just press gas pedal :))
Many cars require you to press the gas pedal when starting the car. It's quite normal.
The pedal on the left is the clutch. You press it when you are changing gears.
On cars with a carburetor you must press on the gas pedal to activate the choke, cars with fuel injection do not have a choke so this is not necessary.
if the car is completely out of gas then it take a little while for the fuel pump to get the fuel to the engine, but i got an alternative, when you turn the key on just let it sit for a second and don't press the gas pedal or try to start it, it should let the gas get to the engine.
This is not normal. If your car is doing this, get it checked out.
You Should Take It To A Garage
When You Drive A Old Skool Car With A Carb You press down the pedal for cold starts but when car is warmed up you don't always have to press down the pedal Sometimes you need to press it down in the morning becoause of the condensation. //////on a car with a carburetor you need to press the gas pedal when starting cold to engage the choke and also the fast idle cam
Occasionally the gas pedal will have some resistance when you press it. You could check and lube gas pedal, gas cable, and throttle itself.