0
Add your answer:
Earn +20 pts
What are the cylinder head torque settings for a fiat punto 55s?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
What are the cylinder head torque settings for a fiat punto 1.1 55?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
Cylinder head torque settings for a 1997 punto s 60?
Head bolts for a Punto 60s need to be tightened in 3 stages: stage 1 - tighten all bolts (in the correct order!) to 30Nm. stage 2 - tighten again, in same order as before, by turning wrench a further 90 degrees stage 3 - repeat stage 2
What are the cylinder head bolt torque settings on a 98 Fiat Punto S 60 1.2?
Punto 1.2 engine code 176A7.000 Torque Stage 1. 20Nm Stage 2. 30Nm Stage 3. + 90 degrees Stage 4. + 90 degrees.
What are the rocker cover torque settings of a fiat punto?
8-10Nm
What are the Timing belt settings for fiat punto 1200cc 16valve?
There are no timing marks but pins that are put through the head and into the camshaft locking it in the right position. They are dealer parts but you can get aftermarket ones. The crank is then positioned using a rod down the spark plug hole. Again this is available aftermarket. There are 2, one for cyl 1 and one for cyl2
What are the cylinder head torque settings for a fiat punto sporting 1.2 16v 1999?
stage 1. 20Nm stage 2. 30Nm stage 3. +90 degrees stage 4. +90 degrees Sequence 8 6 2 5 10 7 3 1 4 9 Bolts 9 & 10 are the flywheel side of engine.
What are the Cam shaft torque settings on punto 8v?
I Believe They Are Around 40-48 Newton Metres
What are the torque settings for the head bolt on a fiat punto 55 s 1996?
i asume you know your spanners so to help you on your way the torque settings are Fiat Punto 55/60 1.1/1.2 engine make sure you use new bolts ect. Stage 1 30Nm/22LBf ft Stage 2 59Nm/43.5LBf ft Punto 55 engine code 176A7.000 Torque figures stage 1. 20 newton metres stage 2. 30 newton metres stage 3. + 90 degrees stage 4. + 90 degrees torque sequence 8 6 2 5 10 7 3 1 4 9 bolts 9 & 10 are the flywheel side of the engine
Where is cylinder 1 on a fiat punto 1200?
Number 1 cylinder is at the left hand side if viewed from the front of car, i.e. the timing belt end
What are the cylinder head torque settings for a Fiat Punto 60?
firstly tighten in sequence to 20Nm all round, then tighten to 30Nm all round,then tighten 90 degrees all round, and finally tighten a further 90 degrees all round. good luck!.
What is the Firing order for a fiat punto gt?
1 3 4 2 No one cylinder is the timing belt side of the engine
