0
What else can I help you with?
Where is the diagnostic socket on Peugeot 307 zest?
the diagnostic socket on peugeot 307 is under the ash tray( behind the gear lever). Lift up and remove the rubber pad and there it is. Dave
What is the gear ratio of a 1970 nova with a 307?
Probably a 3.08 gear ratio.
How do you change the gear linkage on peugeot 307?
To change the gear linkage on a Peugeot 307, start by lifting the vehicle and removing the undertray for access. Disconnect the battery, then remove the gear lever and linkage from the transmission by detaching the retaining clips and bolts. Replace the old linkage with the new one, ensuring all connections are secure, and then reassemble the gear lever and undertray. Finally, reconnect the battery and test the gear operation before lowering the vehicle.
How do you change gear oil in 307 hdi?
To change the gear oil in a Peugeot 307 HDi, start by ensuring the vehicle is on a level surface and securely lifted. Remove the drain plug at the bottom of the transmission and allow the old oil to fully drain out. Once drained, replace the drain plug and remove the fill plug on the side of the transmission. Fill the transmission with the recommended gear oil until it reaches the proper level, then replace the fill plug and check for any leaks.
What means automatic gear fault in peugeot 307?
it means that the gear is not able to push up the car due to low preasure in the gear
Picture of Peugeot 307 dashboard warning lights?
how do you remove service warning light on 307
Can you remove immobiliser from 307 peugoet?
I wouldn't
How do you change lower engine mount on Peugeot 307?
To change the lower engine mount on a Peugeot 307, first, secure the vehicle on level ground and lift it using jack stands for safety. Remove any components obstructing access to the mount, such as the undertray. Then, unbolt the old mount from the engine and subframe, and replace it with the new mount, ensuring all bolts are torqued to the manufacturer's specifications. Finally, reassemble any removed components and lower the vehicle.
How do you replace peugeot 307 rear suspension bushes?
To replace the rear suspension bushes on a Peugeot 307, first, safely lift the vehicle and support it on jack stands. Remove the rear wheels and then detach the rear suspension components, including the trailing arms or subframe, as needed to access the bushes. Use a suitable tool, like a bush removal tool or a press, to remove the old bushes and install the new ones, ensuring they are properly aligned. Finally, reassemble the suspension components, replace the wheels, and lower the vehicle back to the ground.
How long to change gear linkage on a peugeot 307?
If all goes well, 2-3 hours
What motor come in a 1983 cutlass supreme?
307
What is the gear ratio on a stock 1973 Nova 4 door 307?
More than likely a 3.08 gear ratio. which is a highway gear and a little strip very little unless not stock clutch/torque conveter
